GOWE Automatic PV Ribbon computer Cutting Machine,Solar tabbing wire cutting machine

GOWE Automatic PV Ribbon computer Cutting Machine,Solar tabbing wire cutting machine

• Description; PV ribbon cutting machine can cut the solar tabbing wire from long tabbing wire to shorter, and the length can be adjusted according to different demands. It is automatic cutting machine, adjust cutting speed according to different material,has LCD display to show the digital specifications, the application is wide:Garment factory, shoe factory, handbag factory, electronics factory, electrical appliance factory,
• packing material plant and so on. Features: High speed: It can cut 50~100 cut per minute. (adjust cutting speed according to different materials); Accuracy: Cut-length is accurate cutting to a stepping motor; Cutting type: Cutting is neat due to using a cold cutter which is durable. Automatic operation: It works autoally only by setting length and quantity; Automatic stopper: It stops autoally if materials run out during operation
• Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on; Application: Weave belt, nylon buckle, lining and don't need to heat the sealing ribbon, plastic zippers, shoes webbing, etc. Freature: Simple operation, fast speed, high precision, high efficiency. Notes: Please pay attention to the following in order to ensure safety and the service life of the machine : 1. The power socket should connect to the ground wire.
• 2. Touching or approaching of hand and other objects to the running moving part and hot cutter is strictly forbidden. 3. The machine should be placed horizontally in a well ventilated place with less dust. 4. Please oil the marked parts and moving parts on time. 5. Please clean up the residual waste after the machine is running to avoid excessive accumulation and fault. 6. Voltage should be in the range of 200V-240V.
• Note: the computer control panel will crash when the voltage is less than 210V. Please regularly check whether the set screws of all parts are loose. If the machine is not used for a long time, please put it in a dry place, and add machine oil to the moving parts.