Type 60DA 80DA Heat Sink SSR DC to AC Single Phase Solid State Relay(80DA)

relayRelayType SSR DC To AC Single Phase Solid State Relay 10A 25A 40A 60A 80A 100A 120ASTEP 1: Choose a correct type for currentFor Resistive load: Current of SSR =2 x working current of loadFor Inductive load: Current of SSR =6 x working current of loadFor Capacitive load: Current of SSR =10 x working current of loadSTEP 2: Choose a suitable heat sink.When SSR working it will give out a lot of heat so in order to extend the life of your SSR please install a heat sink also if the current is over 60A the cooling fan also required.And don't forget apply heat-conductive silicon grease between SSR and heat sink.Attention:1. Use fast fuse to protect SSR from load short circuit.2. The temperature of heatsink at use must below 80C.3. It is better to use varistor for inductive load.Features1.Built-in RC.2.With LED indicator.3.Zero-cross Or Random turn-on.The default is zero cross SSR.Random turn-on needs to be .

• relay
• Relay
• 1.Built-in RC.
• 2.With LED indicator.
• 3.Zero-cross Or Random turn-on.The default is zero cross SSR.Random turn-on needs to be .